Hydrogen Production Equipment
The first PEM hydrogen production equipment independently developed by Sinohytec has achieved a number of key performance breakthroughs, with faster dynamic response speed, higher electrolysis efficiency, higher hydrogen production pressure and smaller equipment footprint. It can dynamically follow the instantaneous fluctuations of wind and photovoltaics in real time, achieve second-level response speed, and maximize the conversion of electricity into hydrogen.
Product parameters
Rated Hydrogen Production Capacity (Nm³/h)
100
Rated Oxygen Production Capacity (Nm³/h)
50
Rated Power (kW)
420
Power Response Range (%)
5-150
Hydrogen Side Pressure (MPaG)
3-4
Oxygen Side Pressure (MPaG)
≤0.35
Operating Temperature (℃)
65-85
Direct Current Consumption (kWh/Nm³)
≤4.2
Stack Efficiency (%)
84
Application scenarios
P-Series Hydrogen
electricity and thermal system
P 500
The system uses a fuel cell engine and is composed of batteries, radiators, heat exchangers, PCS and other key components. The rated thermoelectric power can reach 500kW, the rated power generation power is 240kW, the maximum power generation efficiency can reach 49%, and the comprehensive thermoelectric efficiency can reach 85%. Above, the system can output 380V or 200V AC power, and can output hot water of 70-85℃. It has grid-connected and off-grid working modes and can be used in factories, supermarkets, communities, isolated islands and other scenarios.
Product parameters
Total thermal power (kW)
Maximum thermoelectric comprehensive efficiency (%)
>85%
Rated power generation (kW)
225
Maximum power generation efficiency (%)
>49%
Rated heating power (kW)
281
Dimensions (mm)
3780*2700
*2700
Cold start temperature (℃)
-35
Zero emission
Easy to maintain
Feature introduction
High efficiency
Low noise
High reliability
Long life
Intelligent
Fast response
P 200
The system uses a fuel cell engine and is composed of batteries, radiators, heat exchangers, energy storage converters, fire safety systems and other key components. The combined thermal power rating can reach 200kW, the rated power generation power is 100kW, and the maximum power generation efficiency can reach 52 %, the comprehensive efficiency of thermoelectricity can reach more than 85%. The system can output 380V or 200V AC power, and can output 70-85℃ hot water. It has grid-connected and off-grid working modes and can be used in factories, supermarkets, communities, and isolated islands. and other multi-scenario applications.
Product parameters
Total thermal power (kW)
200
Maximum thermoelectric comprehensive efficiency (%)
91%
Rated power generation (kW)
103
Maximum power generation efficiency (%)
54.25%
Rated heating power (kW)
102
Dimensions (mm)
2600*2200
*2450
Cold start temperature (℃)
-35
Feature introduction
Zero emission
Easy to maintain
High efficiency
Low noise
High reliability
Long life
Intelligent
Fast response
Hydrogen fuel cell engine
200 Million
kilometers
3000+
vehicles
We are at the forefront of the industry.
As of October 2023, the cumulative mileage of hydrogen fuel cell vehicles powered by SinoHytec engines has surpassed 200 million kilometers, with a quantity exceeding 3000 vehicles.
We have established a comprehensive layout for hydrogen fuel cell commercial vehicle products, collaborating with over 30 complete vehicle enterprises.
Our product applications span across various fields and vehicle types, including Hydrogen buses, Hydrogen heavy-duty trucks, Hydrogen logistics vehicles, Hydrogen sanitation vehicles, Hydrogen dump trucks, and Hydrogen cars（passenger）.
Application scenarios
M-Series Hydrogen fuel cell engine
M 180
Product parameters
High voltage supply voltage (V)
400~750
Rated power (kW)
180
Peak power(kW)
200
Cold start temperature (℃)
-35
Maximum efficiency (%)
60
Rated point efficiency (%)
52
Mass power density (W/kg)
710/790
Outline size (mm)
970X865X850
Protection level
IP68/1P6K9K
Low voltage supply voltage (V)
18~32
Loading/lowering rate (kW/s)
System efficiency ≥50% interval (%)
50/100
75
Stack volumetric power density (kW/L)
3.45
Volume power density (W/L)
550
G-Series Hydrogen fuel cell engine
The series of products adopts a stack with fully independent intellectual property rights. The highest quality power density exceeds 800W/kg, achieving -35°C cold start and -40°C low-temperature storage. It can be widely applied in various vehicle types including public transport, logistics, intercity buses, heavy-duty trucks, sanitation vehicles, and dump trucks.
G 200+
Product parameters
High voltage supply voltage (V)
400~750
Rated power (kW)
241
Peak power(kW)
261
Cold start temperature (℃)
-35
Maximum efficiency (%)
60
Rated point efficiency (%)
≥45
Mass power density (W/kg)
757(rated)/820(peak)
Outline size (mm)
Protection level
1200×850×865
IP68
Low voltage supply voltage (V)
18~32
Loading/lowering rate (kW/s)
32/64
System efficiency ≥45% interval (%)
Stack volumetric power density (kW/L)
100
3.5(rated)/3.9(peak)
Volume power density (W/L)
635(rated)/688(peak)
G 120
Product parameters
High voltage supply voltage (V)
400~750
Rated power (kW)
120.2
Peak power(kW)
122.2
Cold start temperature (℃)
-30
Maximum efficiency (%)
58.7
Rated point efficiency (%)
42
Mass power density (W/kg)
701(rated)/713(peak)
Outline size (mm)
Protection level
969×742×722
IP67
Low voltage supply voltage (V)
18~32
Loading/lowering rate (kW/s)
14/14
System efficiency ≥45% interval (%)
Stack volumetric power density (kW/L)
83
3.5(rated)/3.6(peak)
Volume power density (W/L)
662(rated)/673(peak)
G 80Pro
Product parameters
High voltage supply voltage (V)
400~750
Rated power (kW)
80.5
Peak power(kW)
82
Cold start temperature (℃)
-30
Maximum efficiency (%)
59.13
Rated point efficiency (%)
41
Mass power density (W/kg)
555(rated)/566(peak)
Outline size (mm)
Protection level
797×661×699
IP67
Low voltage supply voltage (V)
18~32
Loading/lowering rate (kW/s)
12/14
System efficiency ≥45% interval (%)
Stack volumetric power density (kW/L)
75
3.5(rated)/3.6(peak)
Volume power density (W/L)
494(rated)/503(peak)
T-Series Hydrogen fuel cell engine
In 2019, the company collaborated with Toyota to develop a high-power, ultra-low-temperature metal plate fuel cell engine system. This system utilizes metal plate stacks, with a rated power of 60-120kW, primarily used in intercity high-speed group passenger vehicles, 12-meter buses, and urban-specific sanitation vehicles.
Currently, this engine has been applied to Foton's 9-meter and 12-meter group passenger vehicles, serving as vehicles for the 2022 Winter Olympics.
T 100
Product parameters
High voltage supply voltage (V)
400~730
Rated power (kW)
101
Peak power(kW)
101
Cold start temperature (℃)
-30
Maximum efficiency (%)
56.15
Rated point efficiency (%)
45
Mass power density (W/kg)
714.7
Outline size (mm)
Protection level
1016×787×805
IP67
Low voltage supply voltage (V)
18~32
Loading/lowering rate (kW/s)
20/16
System efficiency ≥45% interval (%)
Stack volumetric power density (kW/L)
100
4.85
Volume power density (W/L)
842
Entire industry
SinoHytec is pleased to share its full industry chain experience.
As one of the leading full industry chain enterprises in the Asia-Pacific region, SinoHytec has led and completed the construction, delivery, and operation of projects involving the utilization of wind and solar and distributed energy for hydrogen production from water, hydrogen storage, and hydrogen refuelling stations.
We possess extensive expertise in these areas.
About
SinoHytec is a full-industry-chain enterprise in the field of hydrogen energy. It provides comprehensive solutions for carbon emission reduction and energy transition.
SinoHytec is a global leading manufacturer of hydrogen fuel cell systems. It possesses the capability for the design, development, and manufacturing of fuel cell systems, including core components like fuel cell stacks. Its products are primarily used in vehicle fuel cell systems and combined heat and power systems.
Since 2016, SinoHytec has supplied over 3,000 sets of hydrogen fuel cell systems to more than 19 commercial vehicle manufacturers. These vehicles have collectively traveled over 200 million kilometers.
In the hydrogen energy industry chain, SinoHytec has led and completed multiple projects utilizing wind and solar energy in conjunction with distributed energy. Green electricity is used for the construction, delivery, and operation of projects involving electrolysis of water to produce hydrogen, hydrogen storage, hydrogen refueling stations, and more.
SinoHytec Stock code for the A-shares 688339.SH
Stock code for the H-shares 02402.HK
Partners
CAREERS
Join Us
As a growing technology company, we are always looking for new team members.
Whether you’re interested in business or have something innovative and unique to bring to the table,
we’d love to see if you’re a good fit for SUNTEC NEPTUNE PTY LTD.
Send us your CV today to and we will get back to you as soon as we can.
